If you have ever laid a pipe down, then you have probably encountered the term fusion bonded epoxy. It is more commonly known as bond glue, epoxy glue or just simply epoxy. There are other names for it such as epoxy tape, but the bottom line is that it is an adhesive that is specially made to bond two pieces of pipe together. This type of glue is often used on gas and oil pipelines and other man-made items that are reinforced with steel or aluminum.
How to Find The Basics of Fusion Bonded Epoxy Lined Pipe
If you want to install an epoxy pipe on your own, then it is important that you understand the process involved and the materials needed in order to complete the job properly. One of the most important steps to success is to ensure that the surface of the pipe is clean and free of debris before you apply the fusion bonded epoxy. You must then create a well manufactured pattern or ring on the inside of the pipe using the epoxy so that you can create a strong seal once the pipe has been inserted into the hole. Once this is completed, it is very important that you allow the pipe to dry thoroughly before you apply any sealing compound or glue. Failure to do so could lead to the pipe failing at some point during the project.
When selecting the appropriate epoxy, it is very important to pick a high-quality product. The highest quality epoxy will be stronger and last longer than the lowest grade available. If you are going to purchase epoxy products, it is a good idea to ask the salesperson for advice on which products are best for your project. A lot of the time, the experienced salesman on hand at your local hardware store will be able to provide the answer to your question. Regardless of the grade of fusion bonded epoxy lined pipe, it is imperative that you have the proper preparation before beginning the project or it could ultimately fail.